60 in. W × 32 in. D × 4 in. H Single Threshold Acrylic Shower Base – Center, Left or Right Drain

• 60 x 32-Inch Alcove Shower Fit: Designed for standard 60 x 32 in. shower layouts, with a 4-inch overall height. The single-threshold design provides a defined entry for a three-wall shower enclosure.
• Three Drain Location Options: Choose a center drain, left drain, or right drain to suit your bathroom plumbing layout. Review the corresponding dimension drawing before selecting your configuration.
• High-Gloss White Acrylic: The smooth, bright finish complements a wide range of bathroom tiles, wall finishes, and modern shower door styles.
• Slip-Resistant Textured Surface: The patterned shower floor is designed to provide added traction during everyday use while maintaining a clean, understated appearance.
• Fiberglass-Reinforced Construction: Reinforced acrylic construction, a thicker reinforced rim, and multiple PVC support rings on the underside help provide a stable and durable shower foundation.
• Integrated Three-Sided Tile Flanges: Built-in flanges along three sides are designed for three-wall alcove installation. When properly integrated with the surrounding wall waterproofing system, they help support effective moisture management.
• Single 90 mm Threshold: The front threshold measures 3-9/16 in. (90 mm) wide. Check the compatibility of your shower door's bottom rail before purchasing.
• Standard Drain Compatibility: The drain opening is designed for a standard 2-inch compression drain. The drain assembly is not included.

Technical Specifications:

Drain Location Options:

• Center Drain: The drain is positioned at the center of the 60 x 32 in. shower base.
• Left Drain: The drain is positioned approximately 8 inches from the corresponding end, as shown in the left-drain dimension drawing.
• Right Drain: The drain is positioned approximately 8 inches from the corresponding end, as shown in the right-drain dimension drawing.

All three configurations share the same overall base dimensions. Always confirm drain orientation and rough-in measurements against the dimension drawing for your selected variant before ordering.

Installation Notes:

• Measure the shower alcove and verify the plumbing rough-in location before purchasing. Confirm that the 60 x 32 in. base fits the intended installation space.
• Choose the correct drain configuration before installation. Confirm the drain opening and fitting compatibility with your plumbing system.
• Install the shower base before tiling the surrounding walls so the integrated tile flanges can be incorporated into the wall assembly.
• The tile flanges are 3/8 inch (10 mm) deep. The installation diagram specifies a recess in the three-wall opening to accommodate the flanges. Confirm the required framing preparation with your installer before cutting.
• Integrate the flanges with the appropriate wall waterproofing system and follow the manufacturer's installation instructions and applicable local building codes.
• Install the base on a level, adequately supported substrate according to the installation instructions.
• Ensure the shower door's bottom rail is wider than the 3-9/16-inch (90 mm) threshold, as specified in the product diagram. Verify shower door compatibility before installation.
• Professional installation is recommended to help ensure proper fit, drainage, support, and waterproofing.

Care & Maintenance:

• Clean the acrylic surface with a soft cloth or sponge and mild soap and water.
• Use a non-abrasive cleaner suitable for acrylic surfaces to remove everyday dirt and soap residue.
• Avoid abrasive pads, scouring powders, sharp tools, and harsh chemical cleaners that may scratch or dull the finish.
• Rinse away cleaning products after use and wipe the surface dry to help maintain its appearance.
• Periodically inspect the drain connection, surrounding sealant, and visible installation joints for signs of wear or leakage.

Downloads:

• Installation Manual